# How Far Should Recessed Lights Be From Wall?

The rule of thumb is to place your light fixture between 1.5 feet and 3 feet from the wall if you’re going to illuminate an entire wall. If your fixture is fixed, it’s a good idea to put it closer to the wall.

## How far apart do you space 6-inch recessed lights?

The maximum space between each light should be 12 feet if the ceiling is 8 feet. If the lights are too far apart, they will look like spotlights and have big shadows between them.

## How many recessed lights do I need for a 10×10 room?

The rule of thumb is to use one light for every 4 to 6 square feet of ceiling space.

## Can recessed lights be too close?

In rows down the center of the room is the best place to put the lighting. This type of installation is similar to an airport runway. If you want your lighting fixture to be installed close to each other, you need to match the size of the fixture.

## Do recessed lights need to be evenly spaced?

General lighting is to illuminate a room or area. The ceiling should have the same spacing and alignment of the lights. The lights should not be placed in the room based on objects in the room.

## Should you put recessed lights over TV?

There will be no glare on the screen if the room is lit with ambient lighting behind it. It is possible to use your current home lighting to create the same effect as the bias light fixture in the home entertainment area.

## How do you calculate how many recessed lights are needed?

If you want to calculate how many lights you need for a room, you have to take the area of the room and divide it by 1.5. You can get the total watt amount for the light bulbs in the room by doing this.

## How many can lights in a 10×10 kitchen?

To illuminate the task areas of a 10 x10 kitchen with an average height ceiling, 8 can lights or 4 can lights are needed whereas for general illumination, 8 can lights or 4 can lights are needed.

## How far apart should 4in recessed lights be?

Four feet is the distance from the four inches in size to the other side. Six-inch lights should not be placed together. The space between the two lights is equal to the diameter of the lights.

## How many recessed lights do I need for a 12×12 room?

You will need a lot of can lights to illuminate your room. The spacing to avoid cast shadows can be determined by the fixture and overhangs.

## How many can lights for a 12×12 kitchen?

What number of lights do you have? A 12×12 kitchen will use a minimum of three and a maximum of nine lights for illumination. When choosing the number of lights to use in your kitchen, keep in mind the layout of the space.

## How many LED recessed lights can be on one circuit?

The same amount of light can be given by a 60- watt bulb while drawing 10 watt or less, which is equivalent to a current draw of 1/12amp. There is a 15-amp circuit that can be used to control 180 or more lights.

## Can LED lights go around corners?

Is it possible that the strip lights are bent? As long as you bend the tape at the ‘cut’ line, it is possible to bend it around corners. For more difficult angles, you can solder a wire between the lengths of the strip light and cut it.

## How many can lights in a 10×10 kitchen?

To illuminate the task areas of a 10 x10 kitchen with an average height ceiling, 8 can lights or 4 can lights are needed whereas for general illumination, 8 can lights or 4 can lights are needed.

error: Content is protected !!