# How Much LED Lights Do I Need?

If you want to calculate the needed lm, you need to take your room square footage and divide it by your room foot-candle requirement. A 100 square foot living room that requires 10 to 20 foot-candles will need between 1,000 and 2,000 lm. A 100 square foot dining room needs between 30 and 40 foot-candles.

## How many ft of LED lights do I need?

There is a difference between the color of an LED light and the color of a color temperature. The light appears if it is ‘warm’ or ‘cold’.

## How many lights do I need for my room calculator?

If you divide the width of the room by the length, you get the minimum amount of power needed. The number of 60- watt equivalent bulbs is determined by dividing by 60. If you add up the wattage in each bulb, you can figure out how many light fixture are needed.

## How many LED strips do I need?

This is the same with light emitting devices. As a general rule, not to connect more than three complete strips end to end without adding in extra, higher gauge power wire or power supply units down the line.

## How long should LED lights be for a bedroom?

How long should the lights be on in the room? You can find a 16 foot roll of strip lights that can be connected together to make a longer run. A standard sized bedroom can be up to 12 feet by 12 feet.

## Can LED strips light up a room?

If your living room is lit with ceiling lights, then you can install supplemental LEDs for illumination. It is possible to make your living room feel different and more complex by using different types of lighting in the room.

## How do I calculate LED lights for a room?

If you want to calculate the needed lm, you need to take your room square footage and divide it by your room foot-candle requirement. A 100 square foot living room that requires 10 to 20 foot-candles will need between 1,000 and 2,000 lm. A 100 square foot dining room needs between 30 and 40 foot-candles.

## How do I calculate how much light I need?

The footcandle requirement is used to calculate the square footage of a room. A 100 square foot living room requires 20 footcandles and needs 2,000 lm. 4,000 lm 2 is needed for a 100 square foot dining room.

## Is 5000 lumens too bright?

Is there enough light? A 5000 lm led is a very bright light source, so it is likely to be too bright for some applications. It would not be appropriate for general room lighting to be too harsh.

See also  How Much Does It Cost To Run A 50W LED Floodlight?

## Can you connect 2 strips of LED lights?

One of the easiest ways to connect two strips is with a clip. The male and female clips can be used to join the two strips.

## Can I connect 2 LED strips to one power source?

The Y- connectors make it possible to plug in one power source and connect multiple runs of lights with a single plug. There are two, three and four output connections to choose from.

## How do you calculate lighting in a room?

Take the square footage of your room and divide it by the number of foot-candles required for the space to come up with the number oflm. For a bathroom that is 64 square feet with a foot-candles range of 70 to 80, you will need from 70×64 to 80×64 lm.

## How many recessed lights do I need for a 10×10 room?

Take a look at your room to see how much you need. The rule of thumb is to use one light for every 4 to 6 square feet of ceiling space.

## How do I calculate how many ceiling lights I need?

The total sq. footage x 1.5 is how much power is required. The total amount of can lights divided by 60 watt is called the total amount of can lights. 120 square foot room x 1.5 is divided by 60 to get a figure of how many lights need to be put out.

## How many watts of light do I need per square foot?

The general rule of thumb is a minimum of 30 watt per square foot. 50 watt per square foot is the best.