How To Set Up Puck Lights?

How far apart should puck lights be?

One puck light is required for every 8 to 12 inches of cabinet length. The best distribution of light and avoiding dark areas under the cabinets can be achieved with this spacing.

Do LED puck lights need a transformer?

If you want to operate your lights correctly, you don’t need to wire them to a transformer. They can be connected to power. It is possible to use them with standard line voltage dimmers instead of the ones made specifically for low voltage lights.

Where should puck lights be placed?

The upper wall cabinets should have strip lighting or puck lights on them. The lit area below the wall cabinets will be reduced if the lights are mounted in the middle or back of the wall cabinets.

What is the puck light trick?

It’s a quick and inexpensive way to use lights without the need for electrical wiring. Attach a battery powered puck light to the fixture and place it on the wall.


Are puck lights worth it?

Is puck lights worth the cost? Extra light can be added to any room in your home with the help of puck lights. They can be used for a lot of different things. They’re easy to install and don’t require any wiring.

See also  10 Best Puck Lights For Van Conversion

Can LED light work without transformer?

The transformer is required for all mains poweredLED bulbs. The transformer/driver can be built in to the bulb or it can be located outside. The transformer’s purpose is to reduce mains voltage to a level that is relative to the bulb being powered.

Can you run LED lights without a relay?

There is an answer to that. The lights don’t need relays to work. It’s not a good idea to do that. It’s best to use a relay when you’re not sure about the size of the wires and switches.

How do you hide puck light wires?

It’s one of the simplest ways to keep under-cabinet wires out of sight. The wiring can be secured with tie wraps and stapled to the underside of the cabinet. The wire should be extended from the light to the wall.

Why do LED puck lights flicker?

There could be more than one thing. When there are fluctuations in the voltage in your home’s wiring, you may see flickers or dim lights in your home. When electrical loads are turned on and off in your home, it can cause a change in voltage levels, which can cause the lights to flicker or dim.

How do you space under cabinet puck lights?

If you’re installing pucks, we recommend spacing them close to each other. If you want to leave a gap equivalent to the size of the product, you can install them from end to end.

How far apart do you space 6 inch recessed lights?

The maximum space between each light should be 12 feet if the ceiling is 8 feet. If the lights are too far apart, they will look like spotlights and have big shadows between them.

See also  7 Best Puck Lights For Boats

How far apart should dusk to dawn lights be?

Most areas where electric service is already available will usually have dusk-to-dawn lights installed. It’s important to remember that the distance between two bulbs should be more than 3.3 feet.

error: Content is protected !!