Is A Special Dimmer Switch Needed For LED Lights?

You won’t be able to dim the light completely or not very well if you use a standard dimmer switch. There is a special electronic dimmer switch that needs to be used to have a fully functioning and dimming light.

Can you hook up a dimmer switch to LED lights?

The smart dimmer switches are compatible with the LEDs. The dimmers are still recommended for these bulbs despite the fact that LEDs will work with them.

What kind of dimmer switch do I need for LED lights?

The best dimmers to use are trailing edge dimmers and leading edge dimmers.

Why do some dimmers not work with LEDs?

The number of Watts of lights that can be worked on by a dimmer switch is shown in the operational range. Because of the less power used by the lamps, they may not be able to meet the minimum load required for the dimmer switch.


Why are my LED lights flickering on a dimmer switch?

The light output of the LEDs flickers when it varies. The dimmable light- emitting diodes are designed to switch on and off at high speeds.

See also  10 Best Dimmer Switch For 8 Spotlights

Can you use dimmable LED light bulbs in a regular socket?

There is a non-dimmable circuit that can be used for a dimmable lamp. A non-dimmable lamp in a dimmable circuit can cause damage to the lamp and the circuit.


How can I tell what kind of dimmer switch I have?

If you already own light bulbs, you can find the product page for the bulbs and check the PDF for a list of compatible dimmers. The dimmer compatibility information is always with the bulbs.

What happens if you try to dim a non dimmable LED?

It’s not possible to dim non-dimmableLED lights. Non-dimmable lights in a dimmer circuit will flicker or run at full brightness. They are likely to burn out more quickly.

How do I know if my downlights are LED?

If you can see a small cylinder in the center, it’s most likely a halogen downlight bulb. If the bulb has a ribbed surface, it’s most likely a LEDs.

How do I know if my dimmer is leading edge or trailing edge?

The names of the two types of phase cutting dimmers are derived from the part of the AC wave that they cut off. There are cuts of the front edge of the waves. The second half of the cycles is cut out by trailing edge dimming.

error: Content is protected !!